Push Button
Remotely operated from a security lodge or reception, the push buttons open, stop and close the equipment accordingly.

Intercom Range
Communication takes place between the slave station and security or reception. A push button is activated to open the equipment. Safety and closing facilities can be by induction loop or photo-electric cell.

Keypad
A code is entered into the keypad and the equipment opens. Safety and closing facilities can be by induction loop or photo-electric cell.

Proximity Card Control
The users card is placed over the reader, which reads the information. Assuming the card is valid, the equipment opens. Safety and closing facilities can be by induction loop or photo-electric cell.

Radio Control
The vehicle occupant or security officer presses the button located on the transmitter. The equipment opens and the vehicle proceeds. The equipment can be closed by again pressing the transmitter or by induction loop or photo-electric cell.

Token Acceptor
The vehicle occupant is issued with a token from security or reception. The vehicle occupant inserts the token into the acceptor, and the equipment opens. Safety and closing facilities can be by induction loop or photo-electric cell.

Vehicle Transponder
A transponder is fitted to the chassis of the vehicle. When the vehicle drives over the floor mounted induction loop, the equipment opens. Safety and closing can be by induction loop or photo-electric cell.

Stand-Alone Proximty Control
The users card is placed over the reader (40mm read range), which reads the information. Assuming the card is valid, the equipment opens. Safety and closing facilities can be by induction loop or photo-electric cell.

Ticket Machine
The vehicle approaches the ticket machine and takes a ticket, printed with the date and time. The equipment opens once the ticket has been removed from the machine. Safety and closing can be by induction loop or photo-electric cell.

CK20 Card Reader
Key holder inserts their card into the card reader (all keys are programmed with the same number), the equipment opens. Safety and closing can be by induction loop or photo-electric cell.

Standard Tip Support Post
The standard unit is available for all rising arm traffic barriers. The pole end rests in the 'V' for extra support. Recommended on spans of over 6000mm.

Lockable Tip Support Post
The lockable tip support post is available for all rising arm traffic barriers. The pole end can be locked in the down position, to prevent vandalism.

Solenoid Tip Support Post
The solenoid tip support post is available on electric rising arm barriers and automatically locks the pole end in place in the lower position.

Card Reader Post
Standard car height posts can be adapted to house many various methods of access control systems.

Dual Height Card Reader Post
Dual height posts facilitate cars and lorries. They can be adapted to house many various methods of access control systems. Dog leg and swan neck type posts can be supplied in various sizes, according to requirements.

Signs
Standard signs include STOP/NO ENTRY/NO EXIT/ENTRY/EXIT, 305mm and 460mm sizes are available. Illuminated signs and lorry height signs are also available. Specialised signage can be arranged, to suit site requirements.

Traffic Lights
Traffic lights can be post mounted or on the equipment supplied. Lights can change from red to green upon equipment activation, depending on site requirements.

PVC Half Height Curtain
PVC half height curtains are available on our range of rising arm barriers. The curtain restricts pedestrian access underneath the barrier arm.

PVC High Bar Curtain
PVC high bar curtains are available on our Heavy Duty rising arm barrier. As well as restricting pedestrian and cyclist access, the high bar ensures the barrier is visible to lorries and other large vehicles.

Boom Lights
Boom lights can be pole mounted and are ideal for poorly lit locations. The lights can remain constantly illuminated in the lower position, or flash, according to site requirements.