A recent installtion of Rising Arm Car Park Barriers in Leeds. This site required the fitment of two 5 metre Hi-Bar PVC Curtains as shown. The Hi-Bar curtain with the double tip support unit was usedto form a secure infill for extra safety,both Traffic Barriers are linked so they operate in tandem with a single push button control by the security office...

For further information on our Rising Arm Barriers and other Car Park Barrier systems, please go to our product range

This customised bespoke sliding gate has just been installed in London. The 11 metre one off design has been detailed with bespoke decorative infill panels to a specialist final paint specifcation. Due the complex design the final assembly was completed on site accompanying the main gate was a further bespoke fully automatic pedestrian gate and two automatic car park traffic barriers.

For further information on our Tracked Sliding Gates and our Challenger Traffic Barriers, please go to our product range

This Rising Kerb Road Blocker and Traffic Barrier combination is to control entry and exit at this distribution warehouse in Bristol. The Rising Kerb Road Blockers and Traffic Barriers are linked so they operate in tandem with a single push button control by the security office. The Road Blockers are Newgate’s Type B design, which enable them to withstand axle weights of 12tonne, which is needed for a site of this type. The Traffic Barriers are Newgate’s popular Challenger Barriers, with reliability and 100% continuous action are ideal for this site.

For further information on our Rising Kerb Barriers and Challenger Traffic Barriers, please go to our product range

This sliding security gate was installed by Newgate at a school near Derby. The initial and main reason for a gate was security. With the area, at the school, in which the gate was to be installed being so tight, it was decided that, our Type 3 sliding gate would be the best solution. After extensive collaboration between the school, MUF Architects and Newgate’s design office the gates unique infill was arrived at. The sliding gate has a special infill boxed section. The staff and children from the school decorated this section to show the school’s name. Children and staff from the School were very enthusiastic when they came to our premises to see the final stages of the manufacture, of their sliding gate.

For further information on our sliding gates or swing gates, please go to our product range.

Thanks to 'muf architecture/art' for the photo.

This recent installation by Newgate is one of many installations at new Tesco stores throughout the Uk. The illustration shows a 10 metre span Electric Type 1 Tracked Sliding Gate installed at the entrance to the delivery yard, Type 1 sliding gates are tracked for spans over 9.5 metres. Along with this gate is a 5.6 metre span Electric Swing Gate, they are manufactured to Tesco’s specification which include high level safety features, such as safety edges, reflective strips, fire alarm signal & yellow flashing lights.

These gates are also fitted with rota spike capping to prevent the gates from being scaled. For further information on our Sliding and Swing Gates, please go to our product range.

This illustration shows an installation by Newgate for Scottish and Southern Energy. With the increasing need to secure and monitor access and exit by personnel to various sites, many clients have shown interest in Full Height Turnstiles. The Twin Rotor Full Height Turnstile is in a galvanised finish which makes it suitable for the exposed location. The Turnstile installation has been designed with infill panels, to fit into the existing fence line. Within the infill panels are special tool box hatches. The Turnstile unit is complete with integral weather canopy and downlights and has a 120° rotor configuration. The Turnstile is bi-directional using a card reader for control of both entry and exit; the tool box hatch release is linked to the turnstile lock system and is also bi-directional. Lockable galvanised swing gates are installed in the outer fence to protect the turnstile and associated equipment when turnstile is not in use.

For further information on our Sliding Gates, please go to our product range.

This attractive and recent installation by Newgate, shows a communal entrance to several properties. To be in keeping with the surrounding area, we have used a semi-decorative bar infill with arrow head capping, for both the electric vehicle swing gates and the semi-automatic pedestrian gate. The electric vehicle swing gates have an electro-hydraulic ram operation controlled by radio control open with loop safety/close on entry and loop control open with loop safety/close on exit. The semi-automatic pedestrian gate has a keypad unlock open with self-closing and locking on entry and push button open with self-closing and locking on exit.

For further information on our Electric or Manual Gates, please go to our product range.

Luton University is the setting for these Road Blocker Barriers. The university was experiencing a problem; their grounds were being used, as a race track, by young drivers. Newgate installed one entry only Rising Kerb and one exit only Rising Kerb on the main entrance and one entry/exit Rising Kerb on the rear entrance. The strong and durable design of the Rising Kerb and its reliability provides a perfect solution for this problem. It offers high level security against unwanted vehicle access. Access control is by pedestal card reader for authorised user to the site or intercom/push button for visitors.

For further information on our Rising Kerb Barrier, please go to our product range.

A recent installation, by Newgate, for RWE, at Ferrybridge. Illustration shows, Newgate Challenger traffic barriers complete pvc curtains, stop signs and boom lights. Along with the barriers is a Full height single rotor turnstile to allow pedestrian access.

This is not a typical lane layout. The layout has been designed, with the help of Newgate’s expert Sales Engineers after consultation with RWE. The problem of access, to the site, by wide load vehicles has been overcome by allowing the entry barriers to be operated independently, with a video intercom connection to security and push button control. Authorised access is permitted by card readers.

For more information the our security barriers CLICK HERE

This illustration shows an installation by Newgate, on an UK Airport. The contract was for, eight Heavy Duty Rising Arm Traffic Barriers. The Heavy Duty barriers are to control traffic from landside to airside. They are controlled by push button control,from manned security points, for entry and exit with loop safety. These Heavy Duty barriers are complete with Hi-bar PVC curtains,illuminated stop signs and boom lights.The Hi-bar PVC curtains also prevent easy access and act as a deterrent to pedestrians.

For further information on our Heavy Duty Rising Arm Traffic Barrier, please go to our product range CLICK HERE

Reliable, Durable and Robust describe Newgate’s Challenger Traffic Barrier.
This is certainly the case for the Challenger barriers on the above site, Dunham Toll Bridge
The first two Challenger Traffic Barriers were installed in January 1992. The toll operation was increased and updated and a further four Challenger barriers were installed in 1995.
These six Challenger Rising Arm Barriers are performing in the region of 4million operation per year without any operation failures, that’s nearly 70 million operations, between them. Dunham Bridge Company has a 2 visit a year maintenance contract with Newgate.

This maintenance contract has proved beneficial, as the only other visits apart from these, are to replace accidental damaged parts.
The Challenger Traffic Barrier has a proven track record and is suitable for many applications.

For further information on our Heavy Duty Rising Arm Traffic Barrier, please go to our product range CLICK HERE

Three Type 1 Electric Sliding Gates have been installed by Newgate on this site at Codnor Gate Business Park, Ripley.

The Sliding Gates have 20mm diameter circular hollow tube infill with hooped capping they have been galvanised and painted black, in order to match the existing fence line.
These gates are controlled by hand held radio transmitters for both entry and exit.

For further information on our Sliding and Swing Gates, please go to our product range